The Sheet Thickness that can be produced is between 1.20 mm and 10.00 mm. The Sheet Width that can be produced is between 500 mm and 2000 mm, and the Production Sheet Length is between 600 mm and 12000 mm.

The thickness of the sheet that can be produced is between 0.50 mm and 3.00 mm, the width of the sheet that can be produced is between 100 mm and 1850 mm, the Input Coil Inner Diameter is between 510 mm and 610 mm.

The thickness of the sheet that can be produced is between 1.50 mm and 8.00 mm, the width of the sheet that can be produced is between 100 mm and 1580 mm, the Input Coil Inner Diameter is between 510 mm and 610 mm.

Those are the flat steel products of roll or plate shapes, produced by means of milling the hot milled flat steels without making warming up processions and whose thicknesses change between 0,20-2,00 mm.

Galvanized flat steels, are produced by means of covering both surfaces of the cold milled metal with zinc layer through the process of hot dip.

They are flat steels of plate shape which have the thickness between 5,00-200,00 mm and width between 1.000-3.800 mm.

It is produced by passing the plate that is heat-treated in high heats through patterned moulds.

It is produced by passing the plate that is heat-treated in high heats through patterned moulds.